Skip to main content
    (914) 656-0885Request an Estimate
    Basement Projects7 min read

    What Should You Check for Moisture Before Finishing a Basement in Yonkers?

    Check a Yonkers basement for water seepage, efflorescence on the walls, and high humidity before you finish the space. Finishing a wet basement traps moisture behind the drywall and causes mold. A moisture assessment and waterproofing, if needed, come before any framing. The cost to fix moisture is a fraction of the cost to redo a finished basement.

    Julian Martelly, founder of MHI Renovation Services, in an MHI cap and hoodie

    Julian Martelly

    Licensed General Contractor · Founder, MHI Renovation Services

    Check a Yonkers basement for water seepage, efflorescence on the walls, and high humidity before you finish the space. Finishing a wet basement traps moisture behind the drywall and causes mold. A moisture assessment and waterproofing, if needed, come before any framing. The cost to fix moisture is a fraction of the cost to redo a finished basement.

    What should you check for moisture before finishing a basement in Yonkers?

    Check a Yonkers basement for water seepage at the floor wall joint, efflorescence on the walls, a damp smell, and high humidity. Look for water stains, mold, and cracks in the floor and the walls. Any of these means the basement needs waterproofing before any framing goes in.

    The table below shows the signs and what they mean.

    SignWhat it meansAction
    Water at the floor wall jointHydrostatic pressure pushing water inInterior drain and sump pump
    Efflorescence on wallsWater moving through the concreteSeal the walls, check grading
    Damp smell or high humidityMoisture in the airDehumidifier and ventilation
    Cracks in the floor or wallsWater entry pathEpoxy injection or seal

    In Yonkers, the basements near Getty Square and the older multi family stock have the most water issues because the water table sits high. I tell homeowners to look at the floor wall joint after a rain. If it is wet, we waterproof before we finish. Finishing a wet basement is the most expensive way to grow mold.

    — Julian Martelly, Licensed General Contractor, MHI Renovation Services

    Why is moisture the first check before finishing a basement?

    Moisture is the first check because finishing a wet basement traps the water behind the drywall and the insulation, where it grows mold and rots the framing. The fix after the finish is a tear out. The fix before the finish is a fraction of the cost. We check moisture before we frame.

    Drywall and insulation hide the problem, they do not solve it. A finished basement with water behind the walls fails within a few years, and the repair means removing everything we just built. The moisture check is the cheapest insurance on a basement project.

    What does basement waterproofing cost in Yonkers?

    Basement waterproofing in Yonkers costs $2,000 to $8,000, depending on the method. An interior drain and a sump pump sit at the low end. Exterior waterproofing with excavation reaches the top. A dehumidifier and crack seal are the lowest cost fixes for minor moisture.

    The method depends on where the water comes from. Water at the floor wall joint needs an interior drain. Water through the walls needs sealing or exterior waterproofing. We diagnose the source before we quote the fix.

    • Dehumidifier: $200 to $600 for humidity only
    • Crack epoxy injection: $300 to $800 per crack
    • Interior drain and sump pump: $3,000 to $6,000
    • Exterior waterproofing with excavation: $5,000 to $8,000+

    How do you test a basement for moisture in Yonkers?

    Test a basement for moisture in Yonkers by taping a square of plastic to the floor and the walls and checking it after 24 hours. Condensation under the plastic means moisture is coming through. Walk the basement after a heavy rain and look at the floor wall joint. A moisture meter reads the walls.

    The plastic test is simple and free. Tape a 12 inch square of clear plastic to the concrete and the walls. If moisture collects under it in a day, the concrete is passing water. That tells us we need a vapor barrier and likely a drain before we finish.

    Does a finished basement need a vapor barrier in Yonkers?

    Yes. A finished basement in Yonkers needs a vapor barrier on the walls and often under the floor to stop moisture from passing through the concrete into the framing and the drywall. The barrier is part of the code for below grade finish. We install it as part of the insulation system.

    The vapor barrier goes on the warm side of the insulation, which in a basement is the interior side. We pair it with a rigid foam insulation that also acts as a moisture break. The combination keeps the wall dry and the insulation effective.

    How do you start a basement finish in Yonkers?

    Call (914) 656-0885 or request a free quote. We assess the moisture first, recommend waterproofing if needed, and then quote the finish. You get a moisture report and an itemized quote before any framing goes in. There is no charge and no obligation.

    We do not frame a basement before we check the moisture. The check is the first step on every basement project. A site visit gives you a moisture report and a finish quote that will not grow change orders later.

    Frequently Asked Questions

    Moisture is the first and the most important check before you finish a basement. Fixing it before the finish is a fraction of the cost of fixing it after. If you want a contractor to assess your basement and hand you a moisture report and a quote, call (914) 656-0885 or request a free quote today.

    MHI Renovation Services Inc. · Yonkers, NY · (914) 656-0885

    Keep reading

    Call MHIRequest an Estimate

    We use cookies to understand how visitors use our site and to improve your experience. Necessary cookies are always on. See our Cookie Policy for details.